CMOS Analog Circuit Design : Basic Circuits (#003)
The approach to analog IC design taken in these notes are to start with the basic level circuits and work upward toward the more complex circuits. The basic circuits include the switch, current sinks and sources, current mirrors, simple voltage and current references, bandgap reference, inverting amplifiers, differential amplifiers, common gate amplifiers, and output amplifiers. These basic circuits will become part of the circuits in the modules to follow. Understanding of positive and negative feedback will be an important part of this module.
Lessons
2 Current Sinks and Sources
Lecture Notes – Resistor Implementations and Current Sinks and Sources
3 Current Mirrors and Simple References
Lecture Notes – Current Mirrors and Simple References
4 Bandgap References
Lecture Notes – Temperature Stable References Design Project – Bandgap Design Project v2
5 Inverting Amplifier
Lecture Notes – Inverting Amplifier
6 Differential Amplifier
Lecture Notes – Differential Amplifier
7 Low Input Resistance Amplifiers – CG, Cas…
Lecture Notes – Low Input Resistance Amplifiers – The Common Gate, Cascode and Current Amplifiers
8 Output Amplifiers
Lecture Notes – Output Amplifiers
9 Bandgap Spec
As part of the completion of the course, and to fully comprehend the concepts explained in the videos, please design a Bandgap circuit as per the specification laid out in the document Bandgap.pdf For your reference Model, Parameter Extraction W Model Parameter Worksheet is available here. You will also enter the results of your assignment … Continue reading “9 Bandgap Spec”