Module 4 – How to Design Op Amps
Lessons
4.2 – How to Design Two-Stage Op Amps
This lesson shows how to design two-stage op amps. The issue of compensation is introduced. Lecture Notes
4.3 – How to Simulate and Measure Op Amps
This lesson shows how to simulate and measure op amps in order to be able to determine if they are performing correctly or not. Lecture Notes
4.4 – Lab03 – Op Amp Design
This laboratory deals with the design of an op amp to meet a given set of specifications. Lecture Notes When you have finished the lesson, click on the link below to start the lab. Note that you must be a registered user on the Efabless platform. Click here to access LAB03
4.6 – How to Use Electric
This lesson shows how to create an account at Efabless and how to use the program Electric to do schematic capture of integrated circuits. There are no lecture notes for this lesson.
4.7 – How to Use NGSpice
This lesson gives examples of how to use NGSpice to do .OP, .DC, .AC, and .TRAN simulations of CMOS integrated circuits. It also shows how to use the waveform viewer SymProbe to look at the results of the simulation. There are no lecture notes for this lesson.