How to Design Comparators
This module uses design procedures to design open loop and clocked comparators.
Lesson 1 – How to design open loop comparators
Lesson 2 – Laboratory 8 – Open loop comparator design
Lesson 3 – How to design improved open loop comparators
Lesson 4 – Laboratory 9 – Design of a comparator with hysteresis
Lesson 5 – How to design asynchronous (clocked) comparators
Lesson 6 – Laboratory 10 – High speed comparator design
Lesson 7 – How to use Electric
Lesson 8 – How to use NGSpice and SimProbe
Lessons
6.2 – Laboratory 08 – Open-Loop Comparator Design
This lesson gives the instructions for performing a laboratory on designing and simulating an open-loop comparator. Lecture Notes
6.3 – How to Design Improved Open-Loop Comparators
This lesson deals with the following topics: Hysteresis Types of comparators Design of open-loop comparators with external hysteresis Design of open-loop comparators with internal hysteresis Design of open-loop comparator for large capacitive loads Wide input common-mode range comparators Lecture Notes
6.4 – Laboratory 09 – Design of a Comparator with Hysteresis
This lesson provides the instructions for the performing a laboratory on designing and simulating a comparator with hysteresis. Lecture Notes
6.5 – How to Design Asynchronous (Clocked) Comparators
This lesson includes the topics of: Autozeroing Latches High-Speed Comparators Lecture Notes
6.6 – Laboratory 10 – High Speed Comparator Design
This lesson gives the instruction on how to perform the design and simulation of a high-speed comparator. Lecture Notes
6.7 – How to use Electric
This lesson reviews how to use the Electric tool on the Efabless platform. There are no lecture notes, only a video.
6.8 – How to use NGSpice
This lesson is a video on how to use NGSpice on the Efabless platform. There is no lecture notes for this lesson, only a video.